2151 19MM

3 PVC 1 3M™ 2151 Rubber Splicing Tape Product Description 3M™ 2151 Rubber Splicing Tape is a conformable, self-fusing rubber electrical insulating tape, manufactured from ethylene-propylene rubber (EPR). Suitable for applications up to 69kV. Product Features      High insulation properties Excellent conformability Excellent sealing properties Excellent and fast self-bonding without blistering Excellent tensile strength and elongation allowing easy application Typical Properties Thickness (mm) Colour Tensile Strength (Mpa) Elongation (%) Dielectric Breakdown (kV/mm) Dissipation Factor (23°C) Dielectric Constant / Permissiveness (23°C) Insulation Resistance (MὨ) Continuous Operating Temperature (°C) Emergency Overload Temperature (°C) 0.51 Black 1.7 700 28 0.05 max 4.0 max 1014 90 130 Note: These are typical values and should not be used for specification purposes Applications     Primary electrical insulation for splicing cable from 600V to 69kV. Moisture sealing electrical connections. End sealing high-voltage cables Electrical insulation for splices and terminations Page 1 of 2 Issue 1 Installation 3M™ 2151 Electrical Tape should be applied in successive half-lapped, level-wound layers until desired build-up is reached. To eliminate voids in critical areas, highly elongate the tape. Stretch the tape in these critical areas just short of its breaking point. Doing so will not alter its physical or electrical properties. In less critical areas, less elongation may be used. Normally, 2151 Tape is stretched to ¾ of its original width in these less critical areas. Always attempt to half-lap to produce a uniform build-up. When using 2151 Tape for splicing cables from 35kV to 69kV, always elongate the tape throughout the entire splice. Shelf Life / Storage 3M™ 2151 Tape has a five-year shelf life (from date of manufacture) when stored under the following recommended storage conditions. Keep the tape stored in its original packaging behind present stock in a clean, dry place, protected from sun light, at a temperature of 26°C 32°C, with relative humidity no more than 80%. Good stock rotation is recommended. Testing 3M™ 2151 Tape meets ASTM D4388 – Standard Specification for Non-metallic SemiConducting and Electrically Insulating Rubber Tapes 3M and Scotchcast are trademarks of 3M Company Important Notice All statements, technical information and recommendations related to the Seller’s products are based on information believed to be reliable, but the accuracy or completeness thereof is not guaranteed. Before utilizing the product, the user should determine the suitability of the product for its intended use. The user assumes all risks and liability whatsoever in connection with such use. Any statements or recommendations of the Seller which are not contained in the Seller’s current publications shall have no force or effect unless contained in an agreement signed by an authorized office of the Seller. The statements contained herein are made in lieu of all warranties, expressed or implied, including but not limited to the implied warranties of merchantability and fitness for a particular purpose which warranties are hereby expressly disclaimed. SELLER SHALL NOT BE LIABLE TO THE USER OR ANY OTHER PERSON UNDER ANY LEGAL THEORY; INCLUDING BUT NOT LIMITED TO NEGLIGENCE OR STRICT LIABILITY; FOR ANY INJURY OR FOR ANY DIRECT; INDIRECT; INCIDENTAL OR CONSEQUENTIAL DAMAGES SUSTAINED OR INCURRED BY REASON OF THE USE OF ANY OF THE SELLER’S PRODUCTS. Electrical Markets Division 3M United Kingdom PLC Sales Office PO Box 393 Bedford MK41 0YE Telephone: 0870 609 4639 Fax: 01234 229 433 Page 2 of 2 3M Ireland Ltd Sales Office The Iveagh Building, The Park, Carrickmines, Dublin 18, Ireland Telephone: (01) 800 812 732 Fax: 353 1 280 3509 3M United Kingdom PLC Head Office 3M Centre, Cain Road Bracknell, Berkshire RG12 8HT Telephone: 01344 858 000 Fax: 01344 858 758 Issue 1